The Orlaco MultiView box features four camera inputs and also provides power supply to the monitor for up to four cameras. Using the built-in software, all camera images can be displayed in various configurations on a single Orlaco monitor.
With the Orlaco MultiView box 4x UNI inputs & Orlaco MultiView box Serial (1x Serial, 3x UNI inputs), up to four cameras can be connected to a single Orlaco monitor. The layout of the composite image and the number of camera images to be displayed can be configured through the menu on the Orlaco monitor. Additionally, it's possible to program the layout under selectable video channels, which can be automatically switched with, for example, the direction of travel or other switches. These channels can also be manually activated or set in a sequence.
An Orlaco Serial 7-pin monitor is required. If the MultiView box is pre-programmed, it can be connected to an Orlaco 4-pin UNI monitor using an Orlaco adapter cable 7pF>4pM (0304220).
With the Orlaco MultiView-box Dual Mode and adapter plug, up to four UNI cameras (4-pin) can be connected to one Orlaco monitor. The layout of the composite image is displayed in split-screen mode, allowing the monitor to simultaneously show two camera images. By switching between the cameras on the monitor, it's possible to manually or automatically (for example, through the switching wires of the direction of travel) switch between the different composite images in split-screen mode.
This MultiView-box Dual Mode comes standard with an Orlaco adapter plug (7pF>4pM - 0357500), enabling the pre-programmed MultiView-box to be directly connected to an Orlaco 4-pin UNI monitor.
Video input
4x camera inputs PAL/NTSC
Video output
1x Orlaco monitor output PAL/NTSC
Housing
Stainless steel
Protection class
IP67 Waterproof
Operating temperature
-40ºC to +85ºC
-40ºF to +185ºF
Weight
0.86kg (excluding adapter cable)
Dimensions
155 x 80 x 35 mm
Optional for Dual Mode
Orlaco adapter plug 7pF>4pM (0357500)
